Abstract

Rapid advances in microelectromechanical structures (MEMS) have enabled the improvement of efficient electricity harvesting equipment, converting ambient vibrational power into usable electric electricity. This newsletter offers the layout and simulation of a MEMS-primarily based array structure vibrational electricity harvester. This is optimized for effective electricity conversion. The proposed harvester ambitions to remove mechanical vibrations from renewable energy resources and convert them into power through piezoelectric effects. It consists of a circular array of rectangular factors, each attached to a heavy weight, to improve the efficiency of electricity incidents. This specific structural configuration ensures surest use of space even as making sure maximum strength harvesting performance. To attain great electricity conversion efficiency, Harvester's PZZ-5H uses piezoelectric substances with excessive electromechanical bonding. The array factors are mainly advanced with prolonged beam lengths and comparatively low widths and thicknesses, which efficaciously make use of low frequency vibrations. The resonant behavior of the structure is analyzed the use of COMSOL Multiphysics software, which provides insight into the mechanical and electric residences of the harvester. The simulation is executed to decide the resonant frequency, ordinary shift, and output voltage under one-of-a-kind boundary conditions. The effects display that the harvester reaches a most output voltage of 1 V whilst it quickens 1 g. This demonstrates its potential as a sensible solution for applications with low strength sources, especially wi-fi sensor networks, biomedical gadgets and IoT-primarily based clever structures. Additionally, through using the available area correctly, the circular array shape considerably increases power density. This study highlights the effectiveness of MEMS-based piezoelectric harvesting in recording environmental vibrations and the conversion into usable electric electricity that contributes to the development of self-successful electronic systems. Future work will cognizance on optimizing material houses and research talents for multi-faceted electricity harvesting to improve normal performance.

Keywords

MEMS, Vibrational Energy Harvester, PZT-5H, Array Structured Energy Harvester,

Downloads

Download data is not yet available.

References

  1. A. Anand, S. Kundu, (2019) Design of Mems Based Piezoelectric Energy Harvester for Pacemaker. Devices for Integrated Circuit (DevIC), IEEE, Kalyani, India. https://doi.org/10.1109/DEVIC.2019.8783311
  2. S. Saxena, R. Sharma, B.D. Pant, (2015) Design and development of cantilever-type MEMS based piezoelectric energy harvester. International Symposium on VLSI Design and Test. IEEE, India. https://doi.org/10.1109/ISVDAT.2015.7208045
  3. V. Sasrika, P. Lakshmi, P. Mangaiyarkarasi, (2019) Power Enhancement of MEMS Based Piezoelectric Energy Harvester for Bio-Fuel Cells. IEEE International Systems Conference (SysCon), IEEE, USA. https://doi.org/10.1109/SYSCON.2019.8836736
  4. D. Chaudhuri, S. Kundu, N. Chattoraj, Design and analysis of MEMS based piezoelectric energy harvester for machine monitoring application. Microsyst Technol, 25(4), (2019) 1437–1446. https://doi.org/10.1007/s00542-018-4156-z
  5. S. Saadon, Y. Wahab, (2015) From ambient vibrations to green energy source: MEMS piezoelectric energy harvester for low frequency application. IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES), IEEE, Malaysia. https://doi.org/10.1109/ISSBES.2015.7435914
  6. I. Sari, T. Balkan, H. Kulah, An electromagnetic micro power generator for wideband environmental vibrations. Sensors and Actuators A: Physical, 145–146, (2008) 405–413. https://doi.org/10.1016/j.sna.2007.11.021
  7. P. Glynne-Jones, M.J. Tudor, S.P. Beeby, N.M. White, An electromagnetic, vibration-powered generator for intelligent sensor systems. Sensors and Actuators A: Physical, 110(1–3), (2004) 344–349. https://doi.org/10.1016/j.sna.2003.09.045
  8. I. Sil, K. Biswas, (2018) Investigation of Design Parameters in MEMS Based Piezoelectric Vibration Energy Harvester. IEEE Electron Devices Kolkata Conference (EDKCON), IEEE, India. https://doi.org/10.1109/EDKCON.2018.8770388
  9. K.A.A. Wahib, Y. Wahab, A.Y.M. Shakaff, S. Saadon, (2015) Array design consideration of the MEMS vibration energy harvester cantilever based structure: Top proof mass vs back etch mass vs interdigitated electrode design. IEEE Student Symposium in Biomedical Engineering & Sciences (ISSBES), IEEE, Malaysia. https://doi.org/10.1109/ISSBES.2015.7435915
  10. J.Q. Liu, H.B. Fang, Z.Y. Xu, X.H. Mao, X.C. Shen, D. Chen, H. Liao, B.C. Cai, A MEMS-based piezoelectric power generator array for vibration energy harvesting. Microelectronics Journal, 39(5), (2008) 802-806. https://doi.org/10.1016/j.mejo.2007.12.017
  11. S. Kunar, S.A. K.ingh, D. Raviteja, G. Kibria, P. Chatterjee, A. Perveen, N. Talib, (2023). Overview of Hybrid Micromachining and Microfabrication Techniques. In Hybrid Micromachining and Microfabrication Technologies. https://doi.org/10.1002/9781394174959
  12. S. Roundy, P. K. Wright, J. M. Rabaey,(2024) Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations. Springer, US. https://doi.org/10.1007/978-1-4615-0485-6
  13. R. Tashiro, N. Kabei, K. Katayama, E. Tsuboi, K. Tsuchiya, Development of an electrostatic generator for a cardiac pacemaker that harnesses the ventricular wall motion. Journal of Artificial Organs, 5(4), (2002) 239–245. https://doi.org/10.1007/s100470200045
  14. L. Zhang, R. Takei, J. Lu, N. Makimoto, T. Kobayashi, T. Itoh, (2017) Development of wide-band low-frequency MEMS vibration energy harvester for utility infrastructure core monitoring system. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), IEEE, Bordeaux, France. https://doi.org/10.1109/DTIP.2017.7984481
  15. S. Balguvhar, S. Bhalla, (2018) Green Energy Harvesting Using Piezoelectric Materials from Bridge Vibrations. International Conference on Green Energy and Applications (ICGEA), IEEE, Singapore. https://doi.org/10.1109/ICGEA.2018.8356282
  16. S.M. Shahruz, Design of mechanical band-pass filters for energy scavenging. Journal of Sound and Vibration, 292(3–5), (2006) 987–998. https://doi.org/10.1016/j.jsv.2005.08.018
  17. S.M. Shahruz, Limits of performance of mechanical band-pass filters used in energy scavenging. Journal of Sound and Vibration, 293(1–2), (2006) 449–461. https://doi.org/10.1016/j.jsv.2005.09.022
  18. S.P. Beeby, M.J. Tudor, N.M. White, Energy harvesting vibration sources for microsystems applications. Measurement Science and Technology, 17(12), (2006) R175–R195. https://doi.org/10.1088/0957-0233/17/12/R01
  19. H.A. Sodano, D.J. Inman, G. Park, A review of power harvesting from vibration using piezoelectric materials. Shock and Vibration Digest, 36(3), (2004) 197-206. https://doi.org/10.1177/0583102404043275
  20. A. Kim, M. Ochoa, R. Rahimi, B. Ziaie, New and Emerging Energy Sources for Implantable Wireless Microdevices. IEEE Access, 3, (2015) 89–98. https://doi.org/10.1109/ACCESS.2015.2406292
  21. B.L. Jina Kim, J.K. Grisso, Kim, D.S. Ha, D.J. Inman, (2008) Electrical modeling of Piezoelectric ceramics for analysis and evaluation of sensory systems. IEEE Sensors Applications Symposium, IEEE, Atlanta, GA. https://doi.org/10.1109/SAS13374.2008.4472956
  22. M.T. Todaro, F. Guido, L. Algieri, V.M. Mastronardi, D. Desmaële, G. Epifani, M. De Vittorio, Biocompatible, flexible, and compliant energy harvesters based on piezoelectric thin films. IEEE Transactions on Nanotechnology, 17(2), (2018) 220-230. https://doi.org/10.1109/TNANO.2017.2789300
  23. H. Al-Quaishi, C. Lu, W.K. Alani, Vibration Energy Harvesting: A Bibliometric Analysis of Research Trends and Challenges. Journal of Vibration Engineering & Technologies, 12(Suppl 2), (2024) 2253–2281. https://doi.org/10.1007/s42417-024-01533-7
  24. X. Tian, T.N. Iordanidis, G. Stemme, N. Roxhed, Low-Temperature Fabrication of Millimeter-Scale MEMS-Based Piezoelectric Ultrasonic Energy Harvesters for Medical Implants. Journal of Microelectromechanical Systems, IEEE, 33(5), (2024) 524-531. https://doi.org/10.1109/JMEMS.2024.3418580
  25. M. Sun, X. Liao, Monolithic Integration of a Microwave Amplifier and a Multisource Energy Harvesting Circuit. IEEE Microwave and Wireless Technology Letters, 34(3), (2024) 318-321. https://doi.org/10.1109/LMWT.2024.3354278
  26. F. Ambia, N. Isac, A. Harouri, D. Bouville, E. Lefeuvre, Biomechanical MEMS Electrostatic Energy Harvester for Pacemaker Application: A Study of Optimal Interface Circuit. IEEE Transactions on Biomedical Engineering, 71(4), (2024) 1127-1138. https://doi.org/10.1109/TBME.2023.3327957
  27. M. Sun, X. Liao, An RF Power Amplifier Integrated With the Self-Health Monitor Sensor and Multisource Energy Harvesting Circuit. IEEE Transactions on Power Electronics, 39(2), (2024) 2237-2246. https://doi.org/10.1109/TPEL.2023.3330499